Release notes
What changed in each release, newest first. Your fleet server’s version is on Settings, About.
0.0.1-beta.62 · 19 November 2026
- Teltonika RUTX and RUTC routers on RutOS run the collector, installed from the command line in the router’s web interface or over SSH.
- A collector’s page shows the memory it uses and the size of its database, with a chart of the last 7 days.
- Collectors on routers use less memory and keep a smaller database, and give freed space back to the router.
- Live charts keep every second, after time away and in a background tab.
0.0.1-beta.61 · 13 November 2026
- The latency chart in the terminal panel marks where a warning starts.
- The Latency p95 tile compares the hour with the terminal’s own baseline, so a normal hour reads inside it.
- The weather panel uses the position shown on the Location card.
- Once its time has passed, a card’s Usually advice says what to do now.
0.0.1-beta.60 · 12 November 2026
- The public demo shows a working fleet, from an outage to planned maintenance.
0.0.1-beta.59 · 12 November 2026
- GL.iNet’s Plug-ins page offers one nf-collector: the current version.
0.0.1-beta.58 · 12 November 2026
- Routers install from one download on the Add collector card: the feed package, uploaded in the router’s LuCI. GL.iNet routers install LuCI first.
- A router’s collector keeps running, and keeps taking updates, through a firmware upgrade that keeps settings.
- A router whose processor is not supported says so when the collector is installed.
- Security updates.
0.0.1-beta.57 · 9 November 2026
- The Add collector card gives each router architecture its own copy button.
- The fleet address and the enrolment token copy on their own, named as on the collector’s setup page.
0.0.1-beta.56 · 8 November 2026
- Live charts open without a gap on slow links.
0.0.1-beta.55 · 7 November 2026
- Routers install from a feed for their own architecture: OpenWrt routers set it up automatically, and GL.iNet routers add the address with their architecture.
0.0.1-beta.54 · 7 November 2026
- A terminal that restarts shows as Rebooted, never as an outage: a mark on the day strip, a row in the events and a marker on the charts.
- Reboots close together on the charts are one marker with a count, so a terminal in a boot loop reads as one stretch.
- The collector runs on GL.iNet and OpenWrt routers, installed from the router’s own package page and enrolled from a browser.
- The collector also runs on 32-bit Raspberry Pis, in a container.
- Reliability improvements.
0.0.1-beta.53 · 3 November 2026
- A terminal whose collector stops reporting reads Not reporting, in grey. Red Outage now means the terminal itself lost service, from its own Starlink status.
- The Status page and the NOC view show trouble being confirmed, a terminal stabilising, and Recovered for a minute. Repeated drops read as one outage.
- The availability report counts outages from each terminal’s own record. A collector that stopped while its terminal stayed in service is not an incident.
- The NOC view lists planned outages below the cards, and a wall display’s view drifts slowly to protect the screen.
- Reliability improvements.
0.0.1-beta.52 · 2 November 2026
- The NOC view shows the organisation’s terminals on a live map, for a desk or a wall screen, and flies to new trouble as it appears.
- Wall displays pair from Settings, Displays, and show the NOC view read only.
- Kiosk mode puts the NOC view full screen for meetings and presentations.
- Security updates and reliability improvements.
0.0.1-beta.51 · 31 October 2026
- The Status page’s day strip and 24-hour availability follow each terminal’s own record of its link.
- A terminal that stays in service reads as available while its connection to the fleet server drops.
- The day strip’s bars are drawn evenly.
- Security updates and reliability improvements.
0.0.1-beta.50 · 29 October 2026
- Security updates and reliability improvements.
0.0.1-beta.49 · 27 October 2026
- Security updates and reliability improvements.
0.0.1-beta.48 · 16 October 2026
- Terminal diagnostics shows the firmware history as a table, with the version the terminal runs now marked Current.
- The Live view’s heater chip reads Terminal heating.
- A new firmware version reaches the firmware history even when the terminal is still restarting after the update.
0.0.1-beta.47 · 12 October 2026
- Reliability improvements across the fleet server.
- When an action is refused, the dialog now says why, for example when the licence has lapsed.
0.0.1-beta.46 · 7 October 2026
- Icons across the dashboard are refreshed to one consistent set.
- The Update available badge clears by itself once the fleet server has been updated.
0.0.1-beta.45 · 6 October 2026
- An organisation’s audit log now shows changes to its users: who added, renamed or removed an account, and when.
- Usernames can be corrected from the Users page.
- Server health reads more clearly, with the disk estimate in days, months or years.
0.0.1-beta.44 · 6 October 2026
- The Week and Year charts now show a gap where a terminal recorded nothing, and the Week and a chosen span label each day.
- Snow melt reads Auto on the Live view for a terminal set to Auto, and hovering Dish heating says the snow melt heater is running.
0.0.1-beta.43 · 6 October 2026
- A terminal that has failed over now names the carrier actually carrying its traffic on the Status board.
0.0.1-beta.42 · 5 October 2026
- The maintenance notice shows when work is scheduled, in progress, running over or completed, and the scheduled notice closes to a small chip beside the clock.
- Settings shows the posted maintenance notice with Cancel and Complete, and the start time is entered in your own time zone.
- Update all now includes terminals that are offline, and a collector that could not apply an update says so on the List and its own page.
0.0.1-beta.41 · 5 October 2026
- Export offers 15m, 1h, 6h, 24h, Week and Year, and a 15m file is the full 900 readings.
- Terminal hardware diagnostics lists each firmware the terminal has run, with the date it was last seen on it.
- Self-test codes are shown for terminals on older firmware too.
0.0.1-beta.40 · 2 October 2026
- Export, after Year on the chart ranges, downloads a terminal’s telemetry for any range or a chosen span as a CSV file.
- Sign in now accepts a username or an email address.
- The time a terminal was last seen no longer steps back briefly after each stored batch.
0.0.1-beta.39 · 1 October 2026
- A terminal on a backup carrier reads as failed over again while its collector cannot reach the terminal and its traffic is leaving through another carrier.
- A Live view left in a background tab fills in the minutes it missed when you return to it.
- The self-test result on the Live view and in Terminal hardware diagnostics links to the Hardware self-test codes page.
- The Position card names where the position comes from in its footer, with the kind of source.
- The Obstruction view’s boot sequence reads in seconds.
- The Diagnostics view’s Status panel is four facts to a row.
- Collectors are offered an update only once the fleet server itself runs that version.
0.0.1-beta.38 · 30 September 2026
- The Diagnostics view shows the terminal’s own hardware self-test and status as a table, as returned, with copy and download.
- The Position card names where the position comes from.
- Update all on the dashboard responds as soon as it is pressed.
- The terminal’s event table says when a planned outage was the fleet server updating to a new version.
- A collector’s Admin view shows its onboard status page as the collector runs it.
- A terminal reads as failed over only while it reports itself disconnected and the site’s traffic is leaving through another carrier.
0.0.1-beta.37 · 29 September 2026
- Failover detection updated to prevent false positives on Starlink.
- The dashboard shows when an update is available for your collectors, with Update all beside it.
- Release notes are linked from the dashboard and from Settings, About.
- Documentation updated.
0.0.1-beta.36 · 26 September 2026
- A collector that is stopped shows as No data, not as an outage. The time is left out of the availability figure.
- The terminal panel shows earlier events with Show earlier.
- Hovering a chart shows the average, p95 and maximum for the span.
- The Feed counts short disconnects apart from faults, and a speed test is one row.
- Times are shown in your time zone throughout.
- The weather prompt links to the terminal’s Location card.
0.0.1-beta.35 · 25 September 2026
- Brush to zoom on the trend charts works at every display scale.