Teltonika
Nexus Telemetry Fleet supports Teltonika’s RutOS 07.25 or later on the RUTX and RUTC series. RutOS installs the collector with opkg, from the CLI in the WebUI, RutOS’s web interface, or over SSH. See Routers for the requirements.
Supported models
| Firmware | Series | Models |
|---|---|---|
| RutOS 07.25 or later | RUTX | RUTX08, RUTX09, RUTX10, RUTX11, RUTX12, RUTX14, RUTX50, RUTXR1 |
| RutOS 07.25 or later | RUTC | RUTC series |
Nexus Telemetry Fleet does not support Teltonika’s MIPS models. See Routers for the models.
Command line
The commands are the same in either place.
| Place | How to open it |
|---|---|
| WebUI CLI | In the WebUI, open System, then Maintenance, then CLI, and sign in as root. Paste with Command+V on a Mac, or Ctrl+V on Windows and Linux |
| SSH | On a computer, run ssh root@<router address> and enter the router’s admin password |
Install
Run the commands in the WebUI CLI or over SSH. Replace <channel> with the
fleet server’s release channel.
opkg install https://fleet-downloads.nexustelemetry.com/openwrt/<channel>/nexus-fleet-feed.ipk && opkg update && opkg install nf-collectorOn a router where the collector is not yet enrolled, the install ends with
Nexus Telemetry Fleet collector installed. and the enrolment steps. The
collector updates from the same feed.
Enrol
Enrol the collector from a browser at http://<router address>:41700, or
with the enrol command. See Routers
for the steps.
Firmware upgrades
Leave Keep settings on for a firmware upgrade. RutOS restores the collector after the upgrade. The collector reconnects to the same record.
Router GPS
RutOS forwards the router’s own Global Positioning System (GPS) position to the collector as NMEA (National Marine Electronics Association) sentences over UDP (User Datagram Protocol). The forwarding port is required and has no default.
- In the WebUI, open Services, then GPS, then NMEA forwarding.
- Forward over UDP to
127.0.0.1, on a port such as10110. - Turn on the
GPGGAandGPRMCsentences. Both are off by default. - On the dashboard, set the collector’s location source to NMEA over UDP, with the same port. See Collector GPS for the steps.
NMEA over TCP connects to a receiver. It does not receive RutOS forwarding. Without forwarding, set the location source to Fixed coordinates on the dashboard.
Paths on RutOS
RutOS installs packages under /usr/local. The binary is
/usr/local/usr/bin/nf-collector. See
Routers for the other paths.